How to Check to Monitor Refresh Rate

Checking and making a setting to your monitor’s refresh rate is something very important to keep your monitor’s performance level at a better or higher position. Because high-end refresh rate truly helps the screen to work efficiently under different tasks, for instance, gaming.

This article is going to guide you about how to check to monitor refresh rate, step by step. By applying such steps, you can take the refresh rate of your monitor to a better position (if it’s manufactured with such ability). So, keep reading below to get complete (almost) information about refresh rate. At a first point before proceeding further, let’s have an overview of refresh rate/

What is the refresh rate?

Refresh rate means how many times a monitor makes an update or refreshes an image within a second. Or you can say that how many layers of an image get cleared under one second.

For instance:

The 144 Hz refresh rate of a monitor means an image gets 144 times upgraded or displayed better within a second. The simple formula goes for refresh rate, that is ‘higher the refresh rate is, higher or smoother results are on monitor screens. Refresh rates come differently under different quality monitors, including 60 Hz, 144 Hz, 240 Hz, etc.

Related: Best 1080p 144Hz Monitors for Gaming

Measurement of Refresh Rate

Refresh rate is measured as Hertz, and the sign for this is ‘Hz’. Which is the frequency SI unit. Which denotes one complete cycle within one second.

How Does Refresh Rate Matter or Important?

Changing and getting a better refresh rate count was important for CRT old monitors and is still important for LCD flat-panel modern monitors.  Let’s have a look at why it’s important that much;

In Crt Old Monitors

Under such CRT old monitors’ low refresh rate was truly an issue. Because it causes flickering in-display visibility while making updates, under such products. That’s why a high-level refresh rate was necessary to eliminate the risk of flickering rate invisibility.

In LCR Flat-Panel Modern Monitors

In modern quality, monitors refresh low refresh rate doesn’t cause flickering problems but the smooth picture quality is an issue. That’s why a high-end refresh rate is required to keep the picture quality and appearance at a smooth level.

Especially for Gaming Purposes

Modern products or monitors (especially the expensive ones) are designed to possess a high refresh rate, because (mostly) they come with the specialty of providing smooth gaming experiences. Under gaming image quality and clearance matter a lot, to get access at every point of happening.

Cheap or lower refresh rate monitors are usually designed for just office or home 9simple) usage and doesn’t fully support gaming. But gaming is now not a simple playtime instead it’s a profession of many, that’s why it needs to be given such level importance.

For Shopping, Etc. Purposes

Not only for gaming but there are also many other things as well for which a high-level refresh rate is required. For instance, when you are looking around a few things for shopping over such monitor screens, a high-end refresh rate is necessary to have a keen look over the product.

Or when you are watching some videos, a better refresh rate helps in getting better visual results and make your movie time perfect with a keen and complete display.

Now, let’s move towards the main point or question of the article.

How to Check to Monitor Refresh Rate Plus How to Change It?

The procedure for checking and changing the refresh rate of your monitor screen is explained below step by step. Have a look;

  1. Get access to the ‘Display Settings’ option
  2. Open your monitor screen first
  3. Then click right simply over your desktop
  4. A menu (options) will get open over the screen
  5. There you can find the Display Settings option
  6. Make a click over it

Note

In case you are using Window XP or Window 7, then need to go to Start Menu and then the Control Panel to get access there for the further procedure (that is also a little bit different from this procedure).

  • Reach the ‘Advanced Display Settings’
  • After reaching inside the Display Settings search for Advanced Display Settings
  • After scrolling a little you’ll easily find the option
  • Click over such option

Note

Under Window 7, after getting inside Control Panel, get access to the option Appearances and Personalization options. Under it look for Adjust screen resolution and click over it for further.

  • Look over the ‘Display Adapter Properties’
  • Under Advanced Display, Settings find and click over Display Adapter Properties
  • This is considered a text link option
  • Clicking over it will take you to the advanced settings options of the screen

Note

In case you contain a setup of the dual monitor. Be careful in selecting the correct or needed monitor screen first. This can be done by reaching the drop-down menu option, which can be found easily at the top.

  • ‘Monitor Tab’ option
  • At the top under advanced settings option, look over Color management and Adapter
  • Here finds the Monitor Tab option
  • Click over it

Note

Window 7 users can open up the option of a new Window under the advanced settings option.

Changing Refresh Rate (As You Desire)

This is the most important point of all steps because here you can make the final changes to your monitor’s refresh rate according to your requirements and choice.

  • Reach the option ‘Monitor Settings’
  • This option is selected to make changes in your refresh rate level
  • Select the refresh rate like 144 Hz (if your monitor possesses the option)
  • Or select the refresh rate level according to the options you have available
  • Then after the final selection confirm the option by clicking Apply and OK
  • Now, the refresh rate level (new) of your monitor screen is selected

All these steps can be easily seen and anyone even a new user can make changes by using these simple steps. Also, in case you have XP Window and Window 7, look over the notes in every step to make changes of refresh rate under such Window.

Note

After selecting the new refresh rate, the monitor is going to use it forever unless you make changes again. But remember selected refresh rate’s application depends on the graphic adapter, resolution power of your monitor screen.

But following the above-explained steps is not the only solution or it’s not a problem always. Instead, sometimes it’s just some simple issue with your system which is causing the bad refresh rate results. Let’s talk about a few of them;

Cable’s Condition (Connected Cables)

Getting a higher-end refresh rate is not possible by using old (bad) conditioned cable connection. As we know cables are needed to get connected to the monitor screen for its functioning, if they are not new and perfect working, of course, they are going to damage the monitor results too.

Port You Are Using

Plus, which port connection you are using also matters the most. For instance, if a monitor possesses both DisplayPort and HDMI connection options with a 60 Hz refresh rate limit. And you have chosen the HDMI among them to make a connection it may result in less perfect.

In such case shift it towards the DisplayPort option, it’ll work much better at this and the same refresh rate level results better under it. So, focus on the type of cable you are using to make accurate and better results.

Note

Either DisplayPort option or HDMI is better for you, depends upon the specifications of your monitor connection. For correct decision look over the setup guide information of your monitor first then make a connection accordingly.

Quality of Cable

Other than the port connection, cable quality matters the most. The cable that comes along with the monitor must be checked before connecting. If it is not of good quality and has cheap manufacturing it’ll be going to cause problems like flickering, which causes the bad level refresh rate results. 

Other Troubleshooting Tips

Only the cable connection and ports are not always the problem in the way of getting perfect refresh rate results, instead, there are some small issues too. Those are highly overlooked always and if they can be solved on time, then you can get the work done easily.

Gpu of Computer Should Be Checked

Look over the graphic card of your monitor, discrete older graphics or integrated graphics cannot fully support the actual refresh rate that the monitor can deliver otherwise. So, look over the graphics card either it supports the refresh rate level or not.

In case your graphics card is an issue, find some other suitable card option for your monitor which perfectly suits the refresh rate and resolution power ability of the monitor.

Native Resolution

This is an often-overlooked point of the monitor. Look over the monitor settings and make the native resolution of the monitor applied over the screen. Because under native resolution the refresh rate or the monitor delivers at its best (mostly).

In-game settings (if it possesses)

This is not an applicable option all the time, but it works in few cases. Integrated graphics settings of the game (which you are playing) if are present. Then select the native resolution and required refresh rate level under such settings individually.

For instance, under such games settings makes the 144 Hz is applied to get smoother image results specifically for such game.

Graphics Drivers

NVIDIA and AMD websites comes often with the latest and updated versions of graphics drivers. So, look over such an updated version over the website first and make an installation for the latest version. This will help in getting better and smooth image results.

Conclusion

The article truly explains the answers of how to check to monitor refresh rate. As it contains basic information about refresh rate and the steps which you can follow (easily) at your monitor screen to make perfect settings of the refresh rate, that are available on your monitor.

Plus, the article also highlights the other troubleshoots which are often overlooked, and getting knowledge of them can perfectly help in getting the best refresh rate results of the monitor. So, you can rely on this article to solve your issue plus to get smooth image results.