Best Graphics Card for Video Editing and Rendering

Since videography has evolved over the years, so has the skills and setup required to edit and render those videos. Video editing and rendering have become much more intensive than it was before. And we have seen that GPU plays a very crucial role in it.

To understand what properties constitute the best graphics card for video editing and rendering. We first need to understand the role of a graphics card in the process. The basic purpose of a graphic card is to convert numbers into images.

In other more geeky words to convert codes into a graphical image. So therefore from a layman’s understanding, the best graphic card shall have the following properties; it should be fast, it should display higher resolution, and have 3D rendering.

Moreover, the best graphics card for video editing and rendering would have a good video memory and a high clock rate.

The top pick for today has to be Asus TufRtx 3060. It is the crowned winner because of its amazing heatsink. The card remains cool even when editing and rendering excessively.

And in our opinion, it is of immense importance for a GPU to maintain its temperature to deliver optimum results. Before you jump into product reviews, you should know how long do GPUs last.

Best GPU’s for Video Editing & Rendering

Best GPU ProductsDetailsPrice
MSI Gaming GeForce GTX 1660 192-Bit1815 MHzCheck Price
GIGABYTE GeForce GTX 1660 TiTU1116 ChipCheck Price
Nvidia Quadro M4000192GB / Per secCheck Price
ASRock Phantom Gaming D Radeon RX 570Polaris 20Check Price
Gigabyte Geforce GTX 1050 TiDisplayPort 1.4Check Price
MSI Gaming GeForce GTX 1660 128-BitDDR6 VRAMCheck Price
ZOTAC Gaming GeForce RTX 3060Twin Edge GPUCheck Price
MSI Gaming GeForce GTX 1650Overclock of 1620MHzCheck Price
GTX 1660 Super Gaming X1,830 MHzCheck Price
ASUS TUF Gaming NVIDIA GeForce RTX 3060Aluminum HeatsinkCheck Price

So let’s have a look at ten best graphics card for 4K video editing and rendering in 2021. Our first product is MSI GeForce.

MSI Gaming GeForce GTX 1660

81gN7myaekL. AC SL1500

Editor’s Choice

  • Boost Clock: 1830 MHz
  • Memory Interface: 192 bit
  • Video Memory – 6GB GDDR5
  • Recommended PSU – 450 W
  • Output: DisplayPort x 3 (V1; 4)

The Geforce GTX 1660 is an amazing graphics processing card that you can use for video editing and rendering activities. If we calculate its utility in comparison to the price of the card. The card will without a doubt outperform your expectations.

So let’s dig deep into the specifications of the card. The overall size of the card is reduced so that, it can fit into most of the body kits with ease.

Other than that the design is extremely exceptional. The body of the card is made out of hard plastic. Moreover, it has two fans on the bottom to dissipate the heat out of the card so it remains cool even when it is tested with stress.

What surprises us most that the card comes overclocked from the factory. The card is overclocked up to 1815 MHz so that you get spectacular performance. This would let you render and edit videos faster than before.

Which would both save you the time and energy that would be spent on the video. It uses an  8-pin connector. The design although might seem like most RTX cards. The card is powered by 1536 CUDA cores.

The DDR6 VRAM on the graphic card is 6Gb which lets you generate an output of 288Gb/s. Also, the power rating on the card is 120 watts for which almost a PSU of 450 watts or above must be installed.

Pros

  • It falls within budget for most of the people
  • It saves a lot of energy.
  • It has a compact size, which saves up space in the kit
  • The GPU makes little to no noise
  • You don’t need to overclock it
  • It can support up to 8k quality

Cons

  • The fan does not stop when GPU is idle

Final Verdict:

To sum it up, if you love your work but at the same time are on a tight budget. The GTX 1660 is your go-to place. It provides you speed with performance. Moreover, it will let you do your work at a better speed than you did it before. It is one of the best budget graphic cards for video editing and rendering. It is also one of the best graphic cards for Linux.

GIGABYTE GeForce GTX 1660 Ti

71PyN 4a6L. AC SL1500
  • Integrated with 6GB GDDR6
  • Windforce 2x Cooling System
  • With alternate spinning fans
  • Intuitive controls with AORUS engine
  • 6GB 192-bit GDDR6
  • 1 x HDMI, 3 x DisplayPort
  • Pci Express 3.0 x16

Gigabyte is widely known to produce some of the best cards in the market. They have both budget-friendly and high expensive cards. The GTX 1660 Ti on its launch was initially sought to be focused more towards the gamers.

But over time it was seen that it performed well for the editors and designers too. This is the top and best video card for editing. One of the best qualities of the GTX 1660 Ti is to maintain its FPS at higher quality. This card has some of both worlds. It has qualities provided in the high-end RTX lineups and some key grabs from the low-end cards.

It is a juncture between them. It has a TU1116 chip. The only downgrading you might notice is from DDR6 to DDR5. Although the card manages to still provide the same memory.

The card features a Turing architecture. If you look at the size it looks pretty compact and can almost fit into most desktop kits. It can be seen at the back of the card that there is, 3 DisplayPort 1.4, and one HDMI 2.0.

As it is seen there were no DVI provided on the card. One of the main reasons for this is their idea of cutting costs for their customers. The fans on the card work only when you are intensively working for hours. The fans won’t turn on normal browsing when the temperature is maintained inside.

The reason for this is to keep the noise in the cabin low most of the time so that you can perform your tasks nicely. Although this one is an expensive option, but we have also prepared a guide on best graphics card under 800 to help you choose an affordable GPU without breaking the bank.

Pros

  • It runs very smoothly.
  • Has good performance capacity.
  • For the price, it is a utilitarian purchase.
  • The noise is very low because of its fans.

Cons

  • It does not come overclocked from the factory.

Final Verdict:

To sum it up, the  GTX 1660 Ti is an amazing budget card. It provides you value for your money. It has a good clock rate, a sturdy built and performs well. The only give here is that it does not come overclocked from the factory. It is one of the best graphics card for video editing and gaming.

Nvidia Quadro M4000

618klpv9z6L. AC SL1000
  • Nvidia Quadro M4000 Maxwell
  • 4 x Displayport v1.2
  • PCI Express 3.0 x16
  • 8GB 256-bit GDDR5 Memory
  • 120W TGP
  • 6 Pin Power Connector
  • No Rear Bracket

The M4000 is built on NVIDIA’s Maxwell architecture’s second spin, similar to the Quadro M6000 we saw in the incredibly powerful Scan 3XS GW-HTX35, but it’s a more recent revision. Without further more we can say that you can count on this gpu for video editing and rendering.

It has significantly more RAM than the K4200, in reality twice as much, as well as significantly more CUDA cores. This could result in a noticeable improvement in results.

All of the most recent 3D APIs are supported, including DirectX 12, OpenGL 4.5, and Shader Model 5. CUDA (of course), as well as OpenCL and DirectCompute, are supported by the compute API, allowing this card to be used for more than just 3D rendering. The power consumption has increased to 120 watts.

The amount of memory is also a huge change. The M4000 keeps the 256-bit memory path, but increases the amount of GDDR5 to 8GB, matching the previous-generation ultra-high-end K5200.

This will significantly improve its ability to handle large texture sets. The memory is also marginally quicker, clocking in at 1,502MHz vs 1,350MHz previously.

In other words, the latest M4000 has the same quantity and speed as its predecessors. It also has the same bandwidth, 192GB/sec, as its predecessors. Even though these run at 650MHz, they can easily outperform the new card.

So, if you recently purchased a device with one of these, you don’t have to feel bad about wasting your money. This makes it one of the best graphics cards for wow.

Pros

  • It performs better than its predecessors.
  • The memory on the card is fast.
  • It is very power efficient.
  • It is affordable for the masses.

Cons

  • It is similar to its predecessors.

Final Verdict:

If M4000 was the only card available without any predecessors. It would’ve been my go-to suggestion for you. But it has predecessors at cheaper prices with almost the same specs.

If you see the performance on this card you’ll understand that if you have bought one you won’t get disappointed. It is one of the best graphics card for video editing and rendering.

Therefore, buying such a card might come as a no-brainer to some. Even though, this is the case. It is also the best gpu for 4k video editing.

ASRock Phantom Gaming D Radeon

61sfbQ1u5oL. AC SL1200
  • 4GB 256-Bit GDDR5
  • Default Mode: 1244 MHz
  • Core Clock OC Mode: 1293 MHz
  • 1 x Dual-link DVI-D 1
  • HDMI 2.0 3 x DisplayPort 1.4
  • PCI Express 3.0 x16

The RX 570 is made of the same silicon as the RX 580, and both are made from the same star stuff that went into making the RX 470 and RX 480 in the previous generation. This is the Sapphire Nitro+ with factory overclocking.

In terms of efficiency, AMD has given the Polaris 20 GPU inside the RX 570 a little more juice. Because of the higher clock speeds, it now consumes more power and has a thermal design point of 150 watts.

The RX 570 is still available in 4GB and 8GB configurations, but the GDDR5 memory reference clocks now start at 7GHz.

Active cooling is often chosen because it is a safe and effective method of lowering component temperatures.

The Dual-slot cooler has two fans and adjusts its cooling output according to the computing load. One of the most common memory types on the market is ASROCK GDDR5 GPU memory. It can be used in both mid-range and high-end cards.

Pros

  • Compact size fit for all types of chassis.
  • Performs really well under stress.
  • Customers trust it.
  • The built is of a premium feel.
  • The cooling on the card is really good

Cons

  • It is not very quiet

Final Verdict:

The price at which the  RX 570 comes at still feels like a pretty good bargain. A factory overclocked card like this would normally cost a lot more than this one does. It delivers excellent speed and quality to its users.

Therefore, it is one of the best graphics card for video editing and rendering. Its smooth-running ability makes it the best graphics card for CAD.

Gigabyte Geforce GTX 1050 Ti

91RlSpgv9SL. AC SL1500
  • Core Clock (MHz): 1442/1328
  • Low Profile Design
  • Supports up to 4 displays
  • Recommended System Power: 300 watts
  • Output: Dual-link DVI-D
  • Max resolution: 7680×4320

Gigabyte is widely known to produce some of the best cards in the market. They have both budget-friendly and high expensive cards.

The GTX 1050 Ti on its launch was initially sought to be focused more towards the gamers. But over time it was seen that it performed well for the editors and designers too.

One of the best qualities of the GTX 1050 Ti is to maintain its FPS at higher quality. This card has some of both worlds. It has qualities provided in the high-end RTX lineups and some key grabs from the low-end cards.

It is a juncture between them. It has a TU1116 chip. The only downgrading you might notice is from DDR6 to DDR5. Although the card manages to still provide the same memory.

The card features a Turing architecture. If you look at the size it looks pretty compact and can almost fit into most desktop kits. It can be seen at the back of the card that there is, 2 DisplayPort 1.4, one HDMI 2.0, and a DVI port.

The fans on the card work only when you are intensively working for hours. The fans won’t turn on normal browsing when the temperature is maintained inside.

The reason for this is to keep the noise in the cabin low most of the time so that you can perform your tasks nicely.

Pros

  • It consumes relatively low power
  • The card has a sturdy reliable design
  • The card is fairly compact to fit in
  • Can be installed easily
  • The card can be overclocked easily

Cons

  • The card does not support VR

Verdict:

The GTX 1050 Ti shines in the low-profile card league. It can fit easily in any chassis and most slots available on the card. Although it is smaller than its competitors it does not stand too far behind in the competition. It is a very good low-profile GPU.

MSI Gaming GeForce GTX 1660

81IUKRmWMyL. AC SL1500
  • Boost Clock: 1860 MHz
  • Memory Interface: 128-bit
  • Video Memory: 6GB GDDR5
  • Output: DisplayPort x 3 (V1. 4)
  • With Twin Frozr 7
  • TORX Fan 3.0

The  GTX Geforce 1660 is an amazing card. In the world of GPUs for video editing and rendering the GTX 1660 is a moderately priced GPU. If we calculate its utility in comparison to the price of the card.

The card will without a doubt outperform your expectations. So let’s dig deep into the specifications of the card.

The overall size of the card is reduced so that, it can fit into most of the body kits with ease.  Other than that the design is extremely exceptional. The body of the card is made out of hard plastic.

Moreover, it has two fans on the bottom to dissipate the heat out of the card so it remains cool even when it is tested with stress.

What surprises us most that the card comes overclocked from the factory. The card is overclocked up to 1815 MHz so that you get spectacular performance.

This would let you render and edit videos faster than before. Which would both save you the time and energy that would be spent on the video.

It uses an  8-pin connector. The design although might seem like most RTX cards. The card is powered by 1536 CUDA cores.

The DDR6 VRAM on the graphic card is 6Gb which lets you generate an output of 288Gb/s. Also, the power rating on the card is 120 watts for which almost a PSU of 450 watts or above must be installed.

Pros

  • It is a very quiet card
  • The fan stops when the card is idle
  • It supports 8k quality with ease
  • The power efficiency rating for the card is high

Cons

  • The memory on the card is not overclocked

Verdict:

To summarize, if you enjoy your job but are on a budget, this is the choice for you. Your best bet is the GTX 1660. It combines pace and efficiency.

Furthermore, it will allow you to complete your work at a faster rate than before. For video editing and rendering, it is one of the best budget graphics cards available.

ZOTAC Gaming GeForce RTX 3060

7156DLyUsYL. AC SL1500
  • NVIDIA Ampere Architecture
  • 2nd Gen Ray Tracing Cores
  • 3rd Gen Tensor Cores
  • 12GB 192-bit GDDR6
  • Boost Clock 1807 MHz
  • Active Fan Control
  • 8K Ready

Understandably, the latest RTX 3060 would be only below the RTX 3070 in terms of performance, offering comparable performance to the RTX 2080/SUPER from the previous generation, but at a slightly lower price to the benefit of consumers.

Although this graphics card is capable of 4K, the sweet spot is 1440p and even 1080p. If you want all of the eye candy, including Ray Tracing and a higher refresh rate display, 1080p becomes the better choice.

The RTX 3060 Ti is up to the task of managing the most recent games and can deliver fluid gameplay in even the most challenging triple-A titles.

The Zotac 3060 Ti Twin Edge GPU, as you can see, is very different from the Founders Edition wallet. The IceStorm 2.0 cooling system is also used on this GPU. The cooling system was designed with wider coverage in mind to keep the GPU cool.

Also, this GPU features a new 11-blade fan that improves airflow by up to 10% over the previous generation version.

Pros

  • 1080p and 1440p Performance
  • Memory is amazing on the GPU
  • Faster than most of its predecessors
  • Ray-Tracing Capability

Cons

  • It does not have any aesthetic RGB lighting

Final Verdict:

When we look at ZOTAC’s efforts with this specific model of the RTX 3060 Ti, we can see that the Twin Edge OC is a viable choice.

The factory overclock may not be substantial compared to the stock/reference frequency, but it still improves overall efficiency, and the custom cooler produces little noise under load, making it a good choice for sound-sensitive gamers. It is one of the best graphics card for video editing and rendering.

MSI Gaming GeForce GTX 1650

51o7JU3 iXS. AC
  • Boost Clock: 1620 MHz
  • Video Memory: 4GB GDDR6
  • Memory Interface: 128-bit
  • Output: DL-DVI-D x 1 / HDMI 2.0b x 1
  • DisplayPort x 1 (v1.4)

The GeForce GTX 1650 is a low-cost gaming graphics card that transforms your computer into a gaming machine.

This card, which is based on the award-winning Turing architecture, provides smooth performance and stunning visuals in the most popular games and is even faster in modern titles.

In OC Mode, the MSI GeForce GTX 1650 D6 VENTUS XS OCV1 has a factory overclock of 1620 MHz Boost Clock (1590 MHz Boost Clock for GDDR6 reference card).

Even when under heavy load, the dual wide fans keep things cool, and DVI, HDMI, and DisplayPort outputs ensure smooth compatibility with modern display devices.

Turing encoder is included in the latest GeForce GTX 1650. Adaptive shading technology, parallel execution of floating-point and integer operations, and a modern unified memory architecture with twice the cache of its predecessor are all included.

Take advantage of Turing’s advanced graphics features with 1.4X power consumption. With output up to 2X the GeForce GTX 950 and up to 70% faster than the GTX 1050 on the new games, you can easily update your PC and get the game ready.

VENTUS is a brand-new dual-fan concept that proudly shows its industrial shapes in neutral colors to blend in with any build.

Pros

  • The power limit is increased.
  • The fan stops when GPU is idle.
  • It works at low temperatures.
  • The potential for overclocking is great.
  • It features an HDMI 2.0b for better quality.
  • Can easily support 8k

Cons

  • The memory is not overclocked

Final Verdict:

It is one of the best graphics card for video editing and rendering. With output up to 2X the GeForce GTX 950 and up to 70% faster than the GTX 1050 on the new games, you can easily update your PC and get the game ready.

GTX 1660 Super Gaming X

71M4pG5B6zS. AC SL1500
  • Boost clock: 1830 MHz
  • Memory Interface: 192-Bit
  • Video Memory: 6GB GDDR6
  • Output: DisplayPort x 3 (V1. 4)
  • Dual Fan VR Ready
  • Twin Frozr 7 Thermal Design

The TU116 GPU used in the GTX 1660 and 1660 Ti is used in the GTX 1660 Super, which is built on the Turing architecture. The GTX designation, rather than RTX, indicates that ray tracing is not supported.

The TU116 die is generated by TSMC using the 12nm FFN (FinFETNvidia) method. The GPU is made up of 6.6 billion transistors on a 284 mm square die.

The GTX 1660 Super has 6GB of GDDR6 memory. A 192-bit bus connects the memory to six 32-bit memory controllers. For 1080p gaming, the 6GB size is ideal.

The MSI GTX 1660 Super Gaming X has a base clock of 1,530 MHz and a memory clock of 1,750 MHz (14 Gbps GDDR6 effective). The boost clock is 1,830 MHz, which is 45 MHz higher than the reference specification.

A black shroud surrounds the two large fans on the Twin Frozr 7 cooler on the card. Sharp angles are used on the plastic cover, with a chevron-like pattern between them. Four tastefully implemented RGB LEDs are also positioned on the front, above, and below the two fans.

Pros

  • The fan stays off at a lower temperature.
  • It is extremely quiet.
  • Can achieve higher FPS at high qualities.
  • The card has a good heatsink.

Cons

  • It is a little expensive as compared to its competitors

Final Verdict:

To summarize, if you enjoy your job but are on a budget, this is the choice for you. Your best bet is the GTX 1660. It combines pace and efficiency.

Furthermore, it will allow you to complete your work at a faster rate than before. For video editing and rendering, it is one of the best budget graphics cards available.

ASUS TUF Gaming NVIDIA GeForce RTX 3060

81pvDYeb%2BqL. AC SL1500
  • Ampere Streaming Multiprocessors
  • New Ampere SM brings 2X
  • 2nd Generation RT Cores
  • Level of ray tracing performance
  • 3rd Generation Tensor Cores
  • Support for up to 8K Resolution

The GeForce RTX 3060 would have been well-received because it brought ray tracing effects to a new mass-market price point while still delivering the normal generational performance gains.

Although it was launched during a period of chaos, the card has so much to offer. Let’s dig into that.

With 4,864 CUDA cores, 38 dedicated second-gen ray-tracing cores, and 80 ROPs, the Asus TUF has the same core technical configuration as all GeForce RTX 3060 Ti graphics cards.

The setup is good enough to dethrone the RTX 2080 Super from the last generation, a beastly graphics card that cost twice as much. Asus crammed cooling into every nook and cranny. A huge aluminum heatsink with heat pipes is included with the TUF 3060 Ti.

With the aid of well-placed thermal pads, a polished cold plate also provides insulation for the memory modules. The black shroud, which is also made of aluminum, houses three axial fans, each with nine blades and dual ball bearings.

The best part is that you can connect your TV, Monitor, and VR with this GPU, thanks to the HDMI 2.1 connection and DisplayPorts.

Pros

  • There is no noise produced by the GPU.
  • Its cooling system keeps it exceptionally cool.
  • It provides high quality.
  • The design is very attractive.
  • The ray-tracing is far more superior to competitors.

Cons

  • It is a big card

Final Verdict:

The Asus Tuf RTX 3060 is a very powerful GPU for video editing. It is one of the most powerful GPUs on our list of the best graphics card for video editing and rendering. The offers great value for the price it comes at.

Buying Guide for Best Graphics Card for Video Editing and Rendering

When buying a graphics card there are a lot of questions in one’s mind. Even before answering all those many questions, it is of utmost importance to understand your usage of the graphics card.

If you do not understand your need you will not be able to answer all those questions.

Your preference brand:

Which brand you prefer would change the dynamics by miles. For example, the price range might vary and the model numbering, and overall specs. As we have seen in some surveys that people prefer Nvidia over AMD for video editing/ rendering.

The price is not the only determinant when deciding which GPU to buy. Although, Nvidia is a bit more expensive than AMD.

It has been seen that people tend to like Nvidia more because of its responsiveness. On the other hand, AMD has its positives too like its energy efficiency and much more.

VRAM:

Video  RAM is the amount of data a graphic card can store temporarily on it. This temporary data helps to shift between tasks. This mobility saves you time and energy. This extra mobility is the ability to perform various tasks at once at a good pace.

So how much VRAM is sufficient? In our and most popular opinions “the more the merrier” one can not have enough VRAM. But there is a lower limit which limits to a minimum of 4 Gb of  VRAM. DDR6 or DDR5 is your personal choice.

Clock-rate:

The clock rate directly responds to the responsiveness of the GPU. A GPU is as responsive as its Clock frequency. The higher frequency a card has the more responsive it is. But clock rates are more important for FPS intensive work.

Therefore, gaming and 3D programs would take the most benefit of a higher clock rate. In graphic cards, there are two types. One that is factory overclocked and two those that need to be overclocked.

In our opinion, it would be better to find a factory overclocked card because it would have a cooling system that has been tested for its overclock as well. And there are fewer chances of overheating.

Frequently Asked Questions

Which Graphics Card Is Best for Video Editing?

The best graphics card is determined by understanding the software the consumer uses. For example, if the customer uses the final cut pro the macs AMD Gpu runs it very smoothly. Therefore, to determine the best graphic card it is essential to understand your software.

Does a Graphics Card Affect Video Rendering?

Yes! A video card does affect video rendering. It is because video rendering is not the CPUs job therefore the graphic card is in charge to render videos.

What Graphics Card Do I Need for 4k Video Editing?

As most of us know that 4k recording has become very convenient over the years. Therefore, it is mandatory to know a graphics card that would support editing a 4k video.

Most top-end AMD and Nvidia cards are seen to easily edit 4k videos. But in surveys, it has been seen that users mostly chose Nvidia graphics card for 4k video editing.

Is RTX Better Than GTX for Rendering?

The answer is not as straightforward as it seems. While some reviewers might straightforwardly crown RTX over GTX it is important to understand why.

Although our answer is positive as well. Why RTX is better at rendering than GTX depends upon the RTX model you select. Mostly, as a common practice, anything above or equal to RTX 2080 Ti is always superior to GTX in rendering.

How Important Is Graphics Card for Video Editing

Since your graphics card is the brain of your computer, it has a huge impact on how much processing power can be devoted to video editing.

For example, MSI Gaming GeForce GTX 1660 192-Bit outperforms many laptops in laptop Geekbench tests and benchmarks. The tradeoff with a more powerful GPU is that it also requires more juice from your power supply unit (PSU) to run, which may cause issues if you don’t have enough wattage on tap.

Furthermore, because video editing often requires either super high frame rates or super low latency (which require at least two cards of GPU), you’ll need an SLI setup or something similar for high-performance video editing. Something like the Zotac GeForce RTX 3060.

Conclusion

Now that you have all the information regarding the best graphics card for video editing and rendering, it’s time to choose the ideal one according to your own preferences.

Either go with the recommended pick or choose the desired one from the list of unbiased reviews, you will be able to pick the right GPU for video editing and rendering.